齒輪輸送泵

Features:

Asserted benchmark displacement（ml / r）:

4 / 6 / 8 / 10 / 12 / 16 / 20 / 25 / 32 / 40 / 50 / 63 / 80 / 100 / 112 / 150 / 180 / 200

Adjusted numerical value of overflow valve:

16bar ( according to the need to adopt higher pressures) Seal material: fluorine rubber

Applied viscosity  ( cSt ) ：12 ~ 20000

Applied scope:

Reduction box, wind power, lubrication system, filtration system, gas stations, vacuum machinery, engine...

Attention:

● Fluid has basic lubricating and compatible chemical characteristic, and it exclude solid impurity substance.

● Avoid idling

● The pump can only be operated in appointed direction, or else seal of the shaft will be wrecked.

● To avoid excessive pressure, the sysrem or pump should be equipped with a relief valve.

● Relief valve equipped with the pump functions as an atmospheric valve in a short time, other than a overflow valve.

● An additional overflow valve should be installed if overflowing exists in a long time.

產品性能

● 標稱排量（ml/r）:4 / 6 / 8 / 10 / 12 / 16 / 20 / 25 / 32 / 40 / 50 / 63 / 80 /100 / 112 / 150 / 180 / 200

● 安全閥整定值：16bar （可根據需要采用更高壓力）

● 密封材料：氟橡膠

● 應用粘度（cSt）：12~20000

應用范圍

● 減速機 ● 風力發電 ● 潤滑系統 ● 過濾系統

● 加油站 ● 真空機械 ● 發動機

注意事項

● 流體應具有基本的潤滑性，不能含固體雜質，且化學特性相容。

● 避免空轉。

● 泵只能以標定旋轉方向運轉，否則會破壞軸的密封性。

● 為避免過度壓力，系統或泵應安裝安全閥。

● 裝在泵上的安全閥起到短期泄壓作用，不可做溢流閥用。

● 長時間溢流需獨立安裝溢流閥。